MMS
Golden Peripheral Pump
Golden Peripheral Pump
Couldn't load pickup availability
Size 1″ x 1″, Motor: 0.5HP, Amp 2.5, Max Suction (M): 8, Max Head (M): 32, Max Discharge (l/m): 30
Function
This series of electric pump has a peripheral type impeller. This pump is made in this way because on the extremities of the impeller there are several radial paddles, which give more energy to the pumped liquid.
The special shaping of the paddles gives the fluid fast radial recycling motion between the paddles of the impeller and the pump body.
This characteristic enables the fluid to increase progressively the pressure in its way from the inlet to the outlet, obtaining the regular and not pulsating flow and high pressures with quite slopping curves.
Pump Construction
Pump body and motor support m cast iron, brass impeller, mechanical seal in carbon/ceramic and rotor shaft in carbon steel with seal and world’s finest pre-greased ball bearings.
Totally enclosed fan cooled motor, with a built in thermal overload protector, the capacitor is permanently in circuit.
Pump Performance Data
Capacity up to: 43 l/min (max.)
Head wp to: 32 mm (max.)
Liquid quality requirement is clean and free from solids or abrasive substances and non-aggressive
Maximum temperature of pump’s liquid -15°C to +70°C
Maximum ambient temperature 4oC
Maximum working pressure 3 bar (max. )
Manometric suction lit of 8 meters with a foot valve fitted, for a suction lift of above 3 meters. It is advisable to install the suction pipe with an internal diameter.
Share
