DEEP-WELL INJECTOR PUMPS WITH HONDA GP160

Function

This series of pumps are closed coupled self-priming pump with HONDA (GP160) Air cooled 4-stroke OHV petrol engines are particularly suitable for pumping water from deep wells. The pump coupled with engine is placed on the surface with an injector immersed into the well. The delivery of water generates by the impeller is conveyed to the outlet, the delivery is sucked, by means of a piping through the ‘venturi system’ connected to the suction chamber, which gives the necessary depression to the suction of the fluid where the injector is immersed in. The fluid sucked by the injector gets mixed in the venturi diffuser with the recycling fluid, coming from the injector body, consequently the fluid pressure increases and it is sucked by the pump through a piping

Pump Construction

Pump Body and Pump Support in Cast Iron, S.S. Impeller, Diffuser in Thermoplastic Resin, Mechanical Seal (Carbon + Ceramic). Rotor Shaft in Steel fitted and the world’s finest Pre-greased Ball Bearings, coupled with Fan Cooled Motor, the Capacitor is permanently in circuit (in single phase motor).

Pump Performance Data

Capacity: 2.2 mᵌ/h (max.) Head: 90 m (max.) Suction: 42 m (max.) Liquid Temperature: -15˚C ̴ +60˚C (max.) Ambient Temperature: +40˚C (max.) Working Pressure: 9 bar (max.) Liquid should be clean and free from solid abrasive substances and non-aggressive.

Application

This closed coupled set (pump with engine) is used for water supply to remote dwelling i.e. farm houses, general water supply, pressurized water using pressure vessels, irrigation and industrial applications, garden watering and general water transfer applications where electricity is not available

Engine Honda (GP160)

Air cooled 4-stroke OHV petrol engine, 25˚ inclined cylinder, horizontal shaft, having 4.8 HP net power with 1.4 L/hr fuel consumption at continuous rated power at 3600 RPM